unblock clogged pipes

How to unblock clogged pipes? Homemade tricks

0 Comments

Blocked pipes cause liquid waste to accumulate in the drain, resulting in bad odors. In fact, they are unbearable and that is why you should consider unlocking the pipes as soon as possible. If you do not have the time, you can call your plumber to come and fix the mess once and for all.

unblock clogged pipes

What is the cause for them to become obstructed?

Blocked pipes cause sewage to drain at a relatively slow rate. There are several causes of blockage in the pipes. First, if your pipes are placed through an area that has heavy traffic, it is very likely to break down as they are overwhelmed by the weight of cars, trucks, among others. This in turn causes the soil to find its way into the pipes leading to a blocked passage.

Incorrect use of drainage

The toilet drain is specifically reserved for transporting human waste to the pit or sewer, but most of the time people force the wrong waste into that channel.

This includes leftovers of foods that contain large amounts of fat that is not diluted. Sometimes waste includes plastic materials that can never be eroded by toxic waste.

When food substances such as mat leaves or tea bags are emptied into the drain, they form blockages due to the reaction between them preventing liquids from continuing to pass to the pipe surfaces.

Use plumbing rods

The drainage pipes are usually buried under the ground and therefore it is not possible to unblock them without subjecting them to fatal damage. Plumbing rods have hooked protrusions that are used to divide and separate waste material from pipes.

This is the reason why these metal rods are used for plumbing in order to unblock the pipes. However, its reliability is facilitated by the presence of an inspection opening in the piping system.

Without an inspection opening, there is no way for the pipes to unclog. In fact, you must make sure that the opening is there when the drainage system is being established. Once you have identified the opening point, you should insert the plumbing rod into the tube in circular motion. This ensures that the teeth possessed by the tool are capable of eliminating any waste that is stuck in the walls of the pipes.

Check the inspection holes

High capacity drainage pipes usually have inspection wells that serve as inspection openings. The inspection wells are usually covered with metal plates and, sometimes, concrete caps.

The lids must be removed so that the tube below can be examined for any obstruction. The presence of stagnant water in the well implies that the tube is already blocked.

Inspection gaps are dangerous

The toxic waste that passes through the drainage pipes is usually filled with poisonous and sometimes flammable gases due to the accumulation of decomposing waste that travels through the sewers. That is why safety precautions must be observed before discovering them.

The following measures must always be taken to ensure your safety:

  • Once you have removed the cover that covers the manhole, take your time to allow fresh air to enter through the opening and neutralize the gases inside, because breathing the toxic air is harmful to your health and has sometimes caused sudden death.
  • Smoking should be avoided around the manhole because it could cause a fire. The gas that comes to the inside surfaces and that are clogged is highly flammable and therefore represents a great danger to your well-being.
  • Always make sure you hiring a company when embarking on such a task. This increases your safety in case you suffer any side effects or accidents.

How to keep the pipes free of obstructions

Taps aerators and some shower heads have small holes that can be clogged by sediment. Aerators can be removed and take a part and cleaning. If the shower has a detachable head, remove and scrape any bark on the inside of the head. If you cannot take your head off, try sticking a pin through each hole. You should clean aerators and shower heads about three times a year. But, you are like most people who just wait for the annoying drip to happen again.

Tricks to unclog sink

Clogged drains are more serious and you should do everything possible to prevent them from getting stuck. The key to maintaining solid drains is to find out what is obstructing them and avoid doing so. The most common cause of clogged kitchen drains is the hot grease that pours down them. When the fat cools it hardens and clogs your pipe. The restricted space becomes a food collector and eventually clogs. Pouring hot water does not really do much. It just puts more into your system so that it gets clogged deeper inside.

The obstructions of the bathroom pipes are usually caused by human hair. After a shampoo, a little hair inevitably enters the pipe and gets stuck in the drain filter control. When enough hair reaches it, it clogs the drain. Approximately three times a year you should remove the drain and remove the trapped hair inside.

The toilet pipes will rarely clog unless something falls on it that should not. A common difficulty arises when you leave an object as an interdental brush or a toothbrush in the tank. The best solution would be to use a rubber plunger or a rod. If you have a septic system, be sure to read the instructions before placing something in your system that makes it worse in the future.

Related Posts