The low water pressure at home can interfere in certain everyday tasks. When there is little water pressure there are two problems: low water pressure in the shower and taps or little hot water.
The most important thing is to identify the causes of low water pressure at home to be able to solve the problem quickly.
In this article, we will tell you how to have more water pressure in the shower and taps at home and what to do if little hot water comes out of the faucet.
Why do I have low water pressure at home?
The low water pressure in the shower can be due to an accumulation of dirt in the faucet or some obstruction that does not allow the normal circulation of water.
On the other hand, the low water pressure in the taps can be the result of an obstruction in the diffusers, a problem in the pressure valve or a water leak.
It is also important to bear in mind that sometimes the lack of water pressure in the shower or taps can be due to clogging in the pipes due to the accumulation of lime, grit and other materials. In this case, it is essential that a specialist in pipe cleaning is in charge of solving this problem and, in this way, reversing the low water pressure at home.
Finally, it is essential to note that other common causes of low water pressure in the shower and faucets in general, can be pressure valve failures and hidden water leaks.
See Also: How to unblock clogged pipes?
What can I do if I have low water pressure at home?
The most important thing to do when faced with low water pressure problems at home is to identify which areas have problems. That is, check the faucets in the bathroom, kitchen and all areas that provide water, opening all the taps and testing both hot and cold water.
Faucet testing is done only if low water pressure occurs in one place; if the problem is in more than one area, the cause may not be obstruction.
In this case, you should look for other causes of the low water pressure in the shower or taps and, perhaps, it is necessary to contact a plumber who specializes in the matter.
How to increase the water pressure of the shower and taps at home?
The solution to low water pressure problems at home will depend on the cause:
If the problem occurs in a specific area, you should check the faucet; in this case, there may be accumulation of materials. To increase the water pressure you will have to remove the tap, check the aerator and, if there is accumulation of residue, let it soak in a mixture of water and alcohol vinegar to clean it well.
If this cleaning does not work, it will be necessary to buy a new one.
Important fact: I turned on the water before changing the aerator. If low water pressure problems persist, you should contact a plumber as it can be a general issue.
If you have low water pressure in the shower, there may be an obstruction that does not allow the correct circulation of the water and, in this case, you will have to do a review by disassembling it.
The task is simple but you must be careful not to damage the shower: use a plier to remove the hose and let it soak in water and alcohol vinegar for a few hours to clean it completely.
Another cause of low water pressure in a home can be a pressure valve failure. To solve this and increase the water pressure, we recommend adjusting it; if this possible solution does not work, the valve may not work anymore and you will have to buy another.
With regard to water leaks, it is important to detect the affected area. Check the toilet, as it is one of the most common places for leaks. You can do this by removing the lid of the backpack or toilet button and adding food coloring: if this coloring leaks into the toilet, it means there is a leak.
Another great indicator of this problem is the cost of the service, if you see a very expensive bill it may be a leak. On the other hand, we recommend being attentive to puddles near areas with water installations, as they are a clear indication of leaks.
In any case, it is better to contact a specialist to verify the detection of leaks and proceed with their repair.
Another important point to keep in mind is that if the problem is low hot water pressure, the water heater or hot water tank is the answer. The appliance valve is probably open; so, try to verify this and close it completely.
If this is not the reason for the low hot water pressure in your house, it will be necessary for an expert to check the pipes of the appliance.
Tips for water pressure problems in the shower or faucet in general
We offer you a series of tips to know how to increase the water pressure at home and what to do when faced with such a problem:
- Contact a plumber to check pipes. Many times the water pressure problems in the shower or faucets come from old pipes, it is very common for them to become clogged due to the accumulation of certain substances. If there is no water pressure at home due to a fault in old pipes, a replacement will be necessary.
- Identify times when water pressure is low in the home. During the morning or evening, more water is used and the pressure may be low during these hours.
- Check the entire building for hot or cold water pressure issues, and if so, contact your water service provider to fix the issue.
